Identifying The Best Diamond Blades For The Job

When choosing a diamond blade product you must first decide how often the product is to be used and the longevity of life expected. If you are a large civil engineer for instance, you will undoubtedly need a product that is to be used on a regular daily basis and that will give long life and a fast cutting speed. On the other hand, if you are a general builder who only occasionally uses a diamond blade you will need to use a product that will adequately do the job, but not necessarily with the same level of performance.

A professional quality product will actually be less expensive per cut/metre in the long run than say an economy blade, since the professional product may cut 10 times more than the economy blade but cost only three times as much. Large companies will consider the price per cut or per metre more important than the initial unit purchase price of the product.

An operator must choose which particular product is best suited to the application in question. The edge application charts should help eliminate the use of the wrong diamond tool for the job and the fault diagnosis section will help if you need to identify any problems that may have occurred whilst in use. It is a fact that 99.9% of problems are caused by operator error and not product failure. edge tries to eliminate user error by correctly identifying all the characteristics and applications of the products to help in the selection process and also describes how best to use each product selected, as well as offering on site training and consultancy.

Statement

Because we have not had a serious blade failure due to product quality or design we would like to make the following statement: Our diamond blades should not fail if used on the correct application and machinery. Therefore we feel there is no need for us to boast about, or put into place any unmeaningful guarantees that we feel would be misleading to the public or end user. The edge brand is a guarantee in its own right. It is renowned for the high quality of its products, its standards and its quality control at point of manufacture. If for any unknown reason a blade should fail then it will be addressed on its own merits and a full refund given subject to our terms and conditons .